Hello, Welcome To VisitValpec!

Valpec

MACHINERY ABRASIVE CUTTING DISCS GARDEN AGRICULTURE PET FOOD

351256465736
 
Home > Sell > Plastering Interior MS20 25kg premixed dry mortar adhesion workability best quality low price made i
Plastering Interior MS20 25kg premixed dry mortar adhesion workability best quality low price made i
Hits: 5496
Price: 2.88Dollar/kilograms
Min quantity: 5000 kilograms
Quantity: 500000 kilograms
Deliver: In days
Expiry: Long-term
Update date 2022-09-27 11:35
 
Detail

Overview

Essential details

  • CAS No.:

  • no

  • MF:

  • Mixture

  • Place of Origin:

  • Portugal

  • Classification:

  • Other Adhesives

  • Main Raw Material:

  • Acrylic

  • Usage:

  • Construction, Fiber & Garment, Packing

  • Brand Name:

  • Fassa

  • Model Number:

  • NO

  • Type:

  • NO

  • Product name:

  • High

  • Application:

  • DIY Crafts

  • Color:

  • White

  • Material:

  • Epoxy Resin+hardener

  • Keywords:

  • Excellent

  • Appearance:

  • Smooth

  • Feature:

  • Eco-friendly

  • Packing:

  • 25kg/bag

  • Certificate:

  • ISO

  • Shelf life:

  • 12 Months

Supply Ability

  • Supply Ability

  • 1040 Bag/Bags per Week

Packaging & delivery

  • Port

  • Leixoes Portugal
  • Lead time:

  • Quantity(kilograms)1 - 1040>1040
    Est. time (days)20To be negotiated

Product Description

 Composition

FASSA MS 20 is a premixed dry mortar composed of Portland cement and hydrated lime, graded sands and specific additives to improve workability and adhesion.

 

Supply - Special sacks with protection against moisture, approx. 25 kg

 

Use FASSA MS 20 is used as a base coat plaster with application by hand or machine on walls made of bricks, concrete blocks, rough concrete etc. For special underlays you need to follow the instructions of the supplier.

 

Substrate preparation

Before the application the surface should be free from dust, dirt and salt efflorescence. Any traces of oil, grease, wax etc. must be removed beforehand. Smooth concrete surfaces must be dry and treated beforehand with primers, such as SP 22. Joints between different elements must be reinforced using special alkali resistant fibreglass mesh; the mesh must not be attached directly to the masonry, rather must be embedded in the surface of the plaster or render. In order to obtain good quality plasters and renders and avoid excessive consumption of material, it is recommended to pay special attention to the construction of the walls; the joints between the bricks must be carefully filled, any holes or cracks in the wall must be closed beforehand, door and window frames must only protrude by a few millimetres. To ensure the walls are plumb, use corner guards or screeds on the corners and vertical guides on the walls.

 

Mixing

MS 20 is mixed and applied by hand, or using plaster sprayers such FASSA, PFT or the like. For application by hand, add 19-21% clean water and mix in a cement mixer or, for small quantities, by hand or mechanical stirrer, for no more than 3 minutes. The mixed mortar must be applied within 2 hours. MS 20 is applied from the bottom upwards and then levelled using an H-shaped or blade screed with horizontal and vertical movements so as to ensure a flat surface. The product is applied in one single layer, to a thickness of 10 mm, and in two layers for greater thicknesses, up to 20 mm. Apply the second layer before the previous layer has hardened. The surface of the plaster or render can be floated, in order to obtain a uniform and compact surface and close any cracks due to plastic shrinkage of the product. This is to be done between 45 minutes and 2 hours after application, depending on the environmental conditions and the type of surface. In interior rooms, the walls are finished by applying materials such as float finishes, smooth coats, mineral wall coatings, etc.

Company Information

 Plastering Interior MS20 25kg premixed dry mortar adhesion workability best quality low price made in europe


Inquiry
Products type
  • N/A
Search
 
Link
  • N/A
351256465736